Division 06 of 06
Steel Products
- Product lines
- 7 listed
- Markets
- 6 trade lanes
- Paperwork
- 8 document types
- Reply to enquiries
- Within one business day
Scope · Steel and Basic Steel Products
NIB 1408260055631 · KBLI 46100 — wholesale trade on a fee or contract basis
In brief
We supply long and flat carbon steel: reinforcing bar, wire rod and billets, hot-rolled coil, sheet and plate, cold-rolled coil and sheet, galvanised and pre-painted coil, structural and hollow sections, and seamless and welded pipe. Each enquiry is answered against a named standard and grade — SNI 2052 BjTS 420B, JIS G3112 SD390 or ASTM A615 Grade 60 for rebar, JIS G3101 SS400 or EN 10025-2 S355JR for structural steel, EN 10219 S355J2H for cold-formed hollow sections, API 5L Grade B PSL1 for line pipe — together with dimensions, tolerance class and surface condition. Many steel products sold in Indonesia fall under mandatory SNI, so product certification and SNI marking have to be in place before the cargo arrives, not arranged after.
Steel is bought from rolling mills and mill-appointed stockists, and every parcel traces back to a heat number. Mill test certificates to EN 10204:2004 type 3.1 come as standard — heat analysis and mechanical results certified by the mill's inspection representative, who is independent of production — and type 3.2, countersigned by an independent inspector or the buyer's representative, is arranged when a project calls for it. On request we appoint a third party at the mill or load port (SGS, Bureau Veritas, Intertek or a buyer-nominated surveyor) for dimensional survey, witnessed testing, marking checks and weight.
Cargo travels containerised or as breakbulk, a choice usually driven by length and bundle weight more than by tonnage. Coils are stowed eye-to-sky or eye-to-side as the vessel's cargo securing manual directs, on timber cradles with dunnage and lashing to the IMO CSS Code. Cold-rolled, galvanised and pre-painted material is edge-protected and wrapped in VCI paper and moisture-barrier film: on a humid tropical voyage it is white rust and handling damage, not mechanical properties, that usually lead to a claim on flat products.
Where it is used
- Reinforced concrete for housing, infrastructure, ports and marine works
- Structural steelwork, warehouses, smelter and plant buildings, portal frames and pre-engineered buildings
- Roofing, cladding, sandwich panels and roll-formed sheeting from galvanised and pre-painted coil
- Line pipe for water, gas and oilfield service, and general pressure piping to a named standard
- Wire drawing, welded mesh, nails and fastener production from wire rod
- Billets for re-rolling and section mills
Markets we ship to
- Indonesia — Java, Sumatra, Kalimantan and Sulawesi
- Malaysia and Singapore
- The Philippines
- Vietnam and Thailand
- Timor-Leste and Papua New Guinea
- Australia and the Pacific
Product lines
Grades, typical analyses and pack formats
Typical figures, published so a buyer can check the fit before getting in touch. The binding values and tolerances are the ones written into our offer.
01
Reinforcing Bar
Ribbed rebar in straight lengths and coils to SNI, JIS, ASTM, BS and GB standards, with rolled-in mill marking and bundle tags tied to the heat number.
Packaging
- Bundles of about 2 t, steel strapped at three to five points
- Bundle tags at both ends showing heat, grade, size and length
- Coils of 1.8–2.5 t for coil rebar
- Breakbulk stow, or 20 ft and 40 ft containers for cut lengths
| Standards and grades | SNI 2052:2017 BjTS 280, 420A and 420B, JIS G3112 SD295, SD390 and SD490, ASTM A615 Gr 40/60/75, ASTM A706 Gr 60 weldable, BS 4449:2005+A3 B500B and B500C, GB/T 1499.2 HRB400E and HRB500E |
|---|---|
| Sizes | 8–40 mm diameter in 6, 9 and 12 m lengths; coil rebar 8–16 mm |
| Mechanical properties | B500B — 500 MPa characteristic yield, Rm/Re 1.08 min, Agt 5.0% min; A615 Gr 60 — 420 MPa yield min, 620 MPa tensile min |
| Tolerances | Mass per metre tolerance ±4.5% for 8 mm and above, tightening on larger diameters as the standard requires |
| Marking | Rolled-in mill mark with grade and size identification, plus bundle tags at both ends |
| HS Code | 7214.20 (hot-rolled bars with indentations); 7213.10 (in coils) |
02
Wire Rod and Billets
Low and medium carbon wire rod in coils for drawing and mesh, and square billets for re-rolling, both priced on heat chemistry and not on grade name alone.
Packaging
- Wire rod in coils, wire-tied, tagged and loaded on saddles
- Billets in bundles or loose stow, banded and tagged by heat
- Breakbulk for 12 m billets; containers for cut lengths
| Wire rod grades | SAE 1006, 1008, 1010 and 1018 in drawing and mesh quality; medium and high carbon grades to specification |
|---|---|
| Wire rod dimensions | 5.5–14 mm diameter, coil weight 1.8–2.2 t, with surface condition and descaling requirement stated |
| Billet grades | 3SP and 5SP and equivalents such as Q195, Q235 and 20MnSi, with chemistry set by the re-roller's requirement |
| Billet sizes | 100 × 100 mm to 150 × 150 mm square in 6–12 m lengths, with corner radius, twist and bow tolerances stated |
| Testing | Heat analysis and tensile as standard, with reduction of area and inclusion assessment on drawing quality rod on request |
| HS Code | 7213.91 and 7213.99 (wire rod); 7207.11 and 7207.20 (semi-finished billets) |
03
Hot-Rolled Coil, Sheet and Plate
Hot-rolled coil, sheet and plate in commercial and structural qualities, impact tested to the grade suffix wherever the standard demands it.
Packaging
- Coils on timber cradles, strapped circumferentially and radially
- Plate in banded lifts with dunnage, corner protected
- Sheet in banded bundles on skids
| Standards and grades | ASTM A36, A572 Gr 50, A1011 and A1018 CS and SS types, EN 10025-2 S235JR/S275JR/S355JR, EN 10111 DD11 and DD12, JIS G3101 SS400, JIS G3131 SPHC |
|---|---|
| Dimensions | Coil 1.2–16 mm thick, 900–2,000 mm wide; plate 6–100 mm thick in cut sizes |
| Condition | As-rolled black, or pickled and oiled; mill edge or trimmed edge as ordered |
| Testing | Heat analysis and tensile, plus Charpy V-notch impact at the temperature the grade suffix requires — JR at +20 °C, J0 at 0 °C, J2 at −20 °C |
| Tolerances | Thickness, width, flatness and camber to EN 10051 for coil and EN 10029 for plate, class stated on the order |
| HS Code | 7208 headings by thickness and coil or non-coil presentation; 7225 for alloy grades |
04
Cold-Rolled Coil and Sheet
Cold-reduced coil and sheet in forming and deep-drawing grades, packed against condensation and rust staining on the voyage.
Packaging
- Coils wrapped in VCI paper and moisture-barrier film with desiccant
- Edge and eye protectors under circumferential and radial strapping
- Sheet in wrapped, banded bundles on skids
| Standards and grades | EN 10130 DC01 to DC06, JIS G3141 SPCC, SPCD and SPCE, ASTM A1008 CS Type B and DS |
|---|---|
| Dimensions | 0.30–3.0 mm thick, 600–1,550 mm wide, in coil and cut sheet |
| Surface and finish | Surface quality A or B; matt, standard or bright finish; oiled or unoiled as ordered |
| Mechanical properties | Yield and elongation by grade, from DC01 for general forming through to DC06 for deep drawing with r-value and n-value requirements |
| Tolerances | Dimensional and flatness tolerances to EN 10131, class stated on the order |
| HS Code | 7209 headings by thickness and presentation |
05
Galvanised and Pre-Painted Coil
Zinc and aluminium-zinc coated coil and coil-coated pre-painted stock, specified on coating mass, paint system and film thickness rather than on colour alone.
Packaging
- Coils in VCI and moisture-barrier wrap with desiccant, on timber cradles
- Edge, eye and outer-wrap protection with plastic or steel strapping
- Interleaving paper on pre-painted material to protect the coated face
| Standards and grades | ASTM A653 CS Type B and SS Gr 33–80, EN 10346 DX51D+Z, DX52D+Z, S250GD+Z and S350GD+Z, and aluminium-zinc to EN 10346 +AZ or ASTM A792 |
|---|---|
| Coating mass | Z80 to Z275 g/m² total both sides, triple spot, for zinc; AZ70 to AZ150 for aluminium-zinc |
| Surface treatment | Regular or minimised spangle, skin-passed, chromate-passivated, oiled or non-oiled as ordered |
| Pre-painted system | Coil coated to EN 10169 — 5–7 µm primer with a 15–25 µm polyester or SMP top coat and a 5–10 µm backer; PVDF systems where the specification requires |
| Colour and testing | RAL or buyer sample reference with agreed colour and gloss tolerance, and T-bend and adhesion results on the certificate |
| HS Code | 7210.49 (zinc coated, other); 7210.61 and 7210.69 (aluminium-zinc coated); 7210.70 (painted or plastic coated) |
06
Structural Sections and Hollow Sections
Open sections and cold-formed or hot-finished hollow sections in structural grades, impact tested, with declaration documents for projects executed to EN 1090.
Packaging
- Bundles strapped and tagged by heat, size and length
- Hollow sections in hexagonal or square bundles with end protection
- Breakbulk for 12 m lengths; open top or flat rack where containerised
| Open sections | Equal and unequal angle, UPN and UPE channel, IPE, IPEA, HEA, HEB and HEM, ASTM A36 and A992 W-shapes, and JIS G3192 profiles |
|---|---|
| Grades | EN 10025-2 S235JR, S275JR and J0, S355JR, J0 and J2; ASTM A36 and A992 Gr 50 |
| Hollow sections | EN 10219 cold-formed S235JRH, S275J0H and S355J2H, EN 10210 hot-finished, and ASTM A500 Gr B and Gr C, in square, rectangular and circular |
| Dimensions and tolerances | Dimensions and mass to EN 10365, tolerances to EN 10056 for angles, EN 10034 for I and H sections and EN 10219-2 for cold-formed hollow sections; standard 6 and 12 m lengths |
| Testing and marking | Heat analysis, tensile and Charpy impacts per grade suffix, with declaration of performance and CE or UKCA marking to EN 10025-1 where the project is executed under EN 1090 |
| HS Code | 7216 headings for sections; 7306.30, 7306.61 and 7306.69 for welded hollow sections |
07
Seamless and Welded Pipe
Line pipe, pressure pipe and general-service pipe, seamless and welded, hydrostatically and non-destructively tested to the governing standard.
Packaging
- Hexagonal bundles for small bore, strapped with end caps
- Loose stow with bevel protectors and separators for large bore
- Coated pipe on padded supports to protect the coating
- Breakbulk or flat rack for 12 m and above
| Line pipe | API 5L Gr B, X42, X52, X60 and X65 in PSL1 and PSL2, as seamless, HFW/ERW, LSAW or SSAW |
|---|---|
| Pressure and general pipe | ASTM A106 Gr B and A53 Gr B seamless, ASTM A252 piles, and black or galvanised threaded pipe to EN 10255 for water and general service |
| Dimensions | 1/2 in to 24 in nominal bore in schedules 10 to XXS, larger diameters as SAW, with plain, 30° bevelled or threaded and coupled ends as ordered |
| Testing | Hydrostatic test to the standard, plus ultrasonic or electromagnetic inspection of weld and body, flattening, bend and impact tests as the grade and PSL require |
| Coating and lining | Three-layer polyethylene, fusion bonded epoxy, coal tar enamel, cement mortar lining, or bare and varnished |
| HS Code | 7304 headings (seamless); 7305 and 7306 headings (welded, by diameter and use) |
Shipping & paperwork
How the cargo is packed, priced and documented
Packaging & stowage
- Bundle and coil weights follow the crane capacity and lifting gear at the discharge port — often the binding limit at smaller island ports — as well as mill practice, so bundle size is agreed with the buyer before rolling or loading.
- Coils are stowed eye-to-sky or eye-to-side according to the vessel's cargo securing manual and the IMO CSS Code, on timber cradles with dunnage between tiers.
- Cold-rolled, galvanised and pre-painted coil is edge-protected and wrapped in VCI paper and moisture-barrier film with desiccant; ventilated stowage away from moisture sources limits white rust.
- Long products in containers are loaded on skids within floor-loading and payload limits; 12 m lengths need open top, flat rack or breakbulk.
- Each bundle, coil and pipe carries a durable tag or stencil with heat number, standard, grade, size and length, cross-referenced to the mill certificate and the packing list.
Incoterms we use
- FOB — the usual basis for breakbulk parcels loaded at the mill's port onto the buyer's nominated vessel.
- CFR — containerised and breakbulk cargo into Indonesian, ASEAN and South Asian ports, with free time and discharge terms set in the contract.
- CIF — CFR plus marine cover; ICC (C) is the Incoterms 2020 minimum and is frequently upgraded for coated flat products.
- FAS — where the buyer's vessel or barge takes the cargo from alongside.
- DAP and DPU — delivery to a named yard or site; under DPU unloading is ours, under DAP it stays with the buyer.
- EXW — ex-stock collection for small quantities and trial lots.
Documents supplied
- Commercial invoice and packing list stating standard, grade, size, heat number, bundle or coil count and theoretical and actual weight
- Mill test certificate to EN 10204:2004 type 3.1, or type 3.2 countersigned by an independent inspector where specified
- Bill of lading, or charter party bill of lading with the charter for breakbulk parcels
- Certificate of origin, legalised where required, with mill and country of melt and pour stated where a trade remedy applies
- Third-party inspection report on dimensions, witnessed testing, marking and weight
- Weight certificate and, for breakbulk parcels, a draft survey report
- SNI product certificate (SPPT-SNI) reference for products under mandatory SNI in Indonesia, or a declaration of performance to EN 10025-1 where a project is executed under EN 1090
- Coating certificate for galvanised, aluminium-zinc, pre-painted or coated pipe, with coating mass or film thickness and test results
For producers
Supplying this division
Mills and mill-appointed stockists with export allocation are invited to send product range, standards and grades, tolerance capability and rolling schedule — with SNI certification status where held. Enquiries are matched to a rolling window, not to indicative stock lists.
Start an enquiry
Give us the grade and the port. We will return origins, terms and a firm price.
Quantity, destination, delivery window and the specification you buy against are enough to begin. Where a product falls outside our book, we tell you plainly instead of offering a substitute.
Answered within one business day · Denpasar, Bali
